LK-3KJU001
Telephone Tooless Keystone Jack
ELECTRICAL:
1.VOLTAGE RATING: 125 VAC RMS
2.CURRENT RATING: 1.5 AMP
3.CONTACT RESISTANCE: 100 MILLIOHMS MAX
4.INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 500 VDC
5.DIELECTRIC STRENGTH: 750 VAC RMS 60Hz,1MIN
ENVIRONMENTAL:
1.STORAGE: -40° TO +85°
2.OPERATION: 0° TO 70
CONFORM TO ANSI/TIA/EIA 568B CATEGORY 3
MATES WITH MODULAR PLUG CONFORMING TO FCC PART 68,SUBPART F
MECHANICAL:
1. HOUSING MATERIAL: PC UL94V-0
2. INSERT MATERIAL: FLAME RETARDANCY ABS UL94V-0
3. PCB MATERIAL: FR-4 THICKNESS:1.6mm
4. CONTACT MATERIAL: PHOSPHOR BRONZE STAMP PIN T=0.35mm
5. IDC CONTACT MATERIAL: PHOSPHOR BRONZE T=0.50mm WITH NICKEL PLATING
6. WIRE: AWG 24~26
LK-5KJU016
Cat5e UTP keystone Jack
1.Two types of tools can be applied for pin termination: 110 type
2.Punch down tool or easy termination E-TOOL
3.E-TOOL allows for termination and cutting of all excess wires
4.Simultaneously in one squeeze
5.High-impact, flame-retardant plastic housing
6.IDC connectors accept 22-24 AWG wire
Electrical characteristics
In accordance with UL 1863
Current rating: 1.5 max
Voltage rating: 150 V
Contact resistance: 20 mohm
Insulation resistance: 500 Mohm
Dielectric withstand voltage: 1000 V, AC RMS, 60 Hz/1min
LK-5KJU021
UTP Cat5e Keystone Jack Tooless
ELECTRICAL:
1. Voltage rating: 125 VAC RMS
2. Current rating: 1.5 AMP
3. Contact resistance: 100 Milliohms MAX
4. Insulation resistance: 1000 Megohms MIN @ 500 VDC
5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN
ENVIRONMENTAL:
1. Storage: -40°TO +85°
2. Operation: 0°TO 70°
Conform to TIA/EIA 568B Category 5e
Mates with modular plug conforming to FCC part 68, Subpart F.
MECHANICAL:
1. Housing material: PC UL94V-0
2. Inser material: Flame retardancy ABS UL94V-0
3. PCB material: FR-4 Thickness:1.6mm
4. Contact material: Phosphor bronze stamp PIN T=0.35mm
5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating
6. Wire: AWG 24-26
LK-5KJU024
Cat5e UTP keystone Jack
1.Two types of tools can be applied for pin termination: 110 type
2.Punch down tool or easy termination E-TOOL
3.E-TOOL allows for termination and cutting of all excess wires
4.Simultaneously in one squeeze
5.High-impact, flame-retardant plastic housing
6.IDC connectors accept 22-24 AWG wire
Electrical characteristics
In accordance with UL 1863
Current rating: 1.5 max
Voltage rating: 150 V
Contact resistance: 20 mohm
Insulation resistance: 500 Mohm
Dielectric withstand voltage: 1000 V, AC RMS, 60 Hz/1min
LK-5KJU026
Cat5e UTP keystone Jack
1.Two types of tools can be applied for pin termination: 110 type
2.Punch down tool or easy termination E-TOOL
3.E-TOOL allows for termination and cutting of all excess wires
4.Simultaneously in one squeeze
5.High-impact, flame-retardant plastic housing
6.IDC connectors accept 22-24 AWG wire
Electrical characteristics
In accordance with UL 1863
Current rating: 1.5 max
Voltage rating: 150 V
Contact resistance: 20 mohm
Insulation resistance: 500 Mohm
Dielectric withstand voltage: 1000 V, AC RMS, 60 Hz/1min
LK-5KJU028
UTP Cat5e/Cat6 Keystone Jack 90 degree, tooless, folding type
Main Description Of The Product:
1. Unshielded Keystone jack. Tooless type, The products are used in the equipment rooms & work area as communication connectors of the intelligent buildings.
2. According to the standard of ISO/IEC 11801:2002 Class E & ANSI/TIA/EIA/568-B.2-1 Cat6 standard.
3. According the regnirement of T568A & T568B. The T568A & T568B labels are sticked on the both sides of the product to give a exact guide when a engineer punches the cables.
4. Connecting: RJ45 port for UTP patch cord and the IDC port for STP horizontal cabling.
5. In accordance with RoHS derective.
6. Fitting for Cat6 cabling systems, can also be used on Cat.5 and Cat.5e cabling systems.
Technique Characteristics:
1. The plastic parts' material: PC UL94V-0
2. 8 Pin of the RJ45 jack: Phosphor bronze with golden plated 3U,6U,15U,30U,50U at option. Inserting duration: 750 times.
3. IDC Clips: Tinned phosphor bronze pins. Fitting for 22AWG/23AWG/24AWG cables.
Punching duration: 250 times.
4. Punching tools: tooless type.
5. Testing condition of transmitting capability: 250MHz
LK-5KJU029
UTP Cat5e In-line Coupler RJ45-RJ45
Technique Characteristics:
1. Material of plastic parts: PC UL94V-0
2. Material of the FCC connectors' 8 pin of the RJ45 jack: Phosphor bronze with
golden plated 3U,6U,15U,30U,50U at option. Inserting duration: 750 times.
3. Testing condition of transmitting capability: 100MHz
LK-6AKJF001
1Available in Cat6 T568 A T568 B wiring.
2Easy to be terminated
Low attenuation loss
Products Description
A shielded version is available to maximum protection from EMI/RFI interference by utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions . The compact size provides high-density connectivity in the work area and elecommunications room .
Features and benefits
1.Available in Cat6, T568A/B wiring schemes, meet or exceed TIA/EIA Cat6 requirements .
2.Shielding protects against EMI/RFI interference
3.Housing: high temperature thermoplastic
4.Compact jack design, 8 positions and 8 conductors
5.Contact: phosphor bronze, phosphor bronze with 6 to 50μ gold plate
6.Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mm
7.Easy to be terminated,extremely low attenuation loss and high return loss
8.High reliability and superior performance
LK-6AKJU001
Specifications
Cat6a keystone jack
*UTP
*10Gb/s performance
*Delivers headroom beyond 500MHz
*TIA/EIA-568B 180 Degree
Cat6a keystone jack Specification
1.10Gb/s performance, meeting or exceeding all performance requirements of the pending Category 6A (augmented category 6) standard, including alien crosstalk.
2.Hardware Certified of complying with TIA/EIA-568B.22-1 Cat 6 A by UP and 3rd Party
3.Complies with EU-RoHS
4.Meets FCC subpart 68 requirements Jack with a minimum 50 microinch gold plating over nickel
5.Easily Portable
6.Insertion life -- 750 cycles minimum UL listed
7.Enhanced PC designed technology provides reliable performance
LK-6KJF003
FTP Cat6 Keystone Jack 180 degree
ELECTRICAL:
1. Voltage rating: 125 VAC RMS
2. Current rating: 1.5 AMP
3. Contact resistance: 100 Milliohms MAX
4. Insulation resistance: 1000 Megohms MIN @ 500 VDC
5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN
6. C6 permanent link: Conform to ANSI/TIA/EIA-568B.2-1
ENVIRONMENTAL:
1. Storage: -40°TO +85°
2. Operation: 0°TO 70°
Mates with modular plug conforming to FCC part 68, Subpart F.
MECHANICAL:
1. Shield material: Brass T=0.30mm Nickel plating
2. Housing material: PC UL94V-0
3. Inser material: Flame retardancy ABS UL94V-0
4. PCB material: FR-4 Thickness:1.6mm
5. Contact material: Phosphor bronze stamp PIN T=0.35mm
6. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating
7. Wire: AWG 24-26
LK-6KJF004
FTP Cat6 Keystone Jack
Main Description Of The Product:
1. Shielded KJ. The products are used in the equipment rooms & work area as communication connectors of the intelligent buildings.
2. The product can resists the electro magnetic interference (EMI) effectively with the compact full-closed shielding structure.
3. According to the standard of ISO/IEC 11801:2002 Class E & ANSI/TIA/EIA 568-B.2-1 Cat6 standard.
4. According the regnirement of T568A & T568B. The T568A & T568B labels are sticked on the both sides of the product to give a exact guide when a engineer punches the cables.
Technique Characteristics:
1. Housing and other plastic parts' material: PC UL94V-0
2. 8 pin of the RJ45 jack: Phosphor bronze with golden plated 3U,6U,15U,30U,50U option. Inserting duration: 750 times.
3. IDC Clips: Tinned phosphor bronze pins. Fitting for 22AWG/23AWG/24AWG cables.
Punching duration: 250 times.
4. Punching tool: Standard 110 punching tool.
5. Testing condition of transmitting capability: 250MHz
LK-6KJF005
FTP Cat6 Keystone Jack
Main Description of The Product:
1 The product can resists the Electro Magnetic Interference (EMI) effectively with the compact full-closed shielding structure.
2 According with ISO/IEC 11801:2002 Class E& ANSI/TIA/EIA/568-B.2-1 Cat6 standard.
3 The T568A &T568B labels are adhibited on the both side of the product to give an exact guide when the engineer punches the cables.
4 Connecting: RJ45 port for STP patch cord and the IDC port for STP horizontal cabling.
5 In accordance with RoHS.
6 Fitting for Cat6 Cabling systems, can also be used on Cat.5 and Cat5e cabling systems.
Technique Characteristics:
1 Housing and other plastic parts' material: PC.
2 8 Pin of the RJ45 jack: Phosphor bronze with golden plated 3U 6U 15U 30U 50U at option. Inserting Dependablity:750times.
3 IDC Clips: Tinned phosphor bronze pins. Fitting for 22AWG/23AWG/24AWG Cables. Punching Dependablity: 250times.
4 Punching Tool: Standard 110 Punching tool.
5 Testing condition of transmitting capability: 250MHz.
LK-6KJU008
ELECTRICAL:
1. Voltage rating: 125 VAC RMS
2. Current rating: 1.5 AMP
3. Contact resistance: 100 Milliohms MAX
4. Insulation resistance: 1000 Megohms MIN @ 500 VDC
5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN
ENVIRONMENTAL:
1. Storage: -40°TO +85°
2. Operation: 0°TO 70°
Conform to TIA/EIA 568B Category 5e
MECHANICAL:
1. Housing material: PC UL94V-0
2. Jack housing material: PBT+15%GF UL94V-0
3. PCB material: FR-4 Thickness:1.6mm
4. Contact material: Phosphor bronze stamp PIN T=0.35mm
5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating
6. Wire: AWG 24-26
LK-6KJU010
ELECTRICAL:
1. Voltage rating: 125 VAC RMS
2. Current rating: 1.5 AMP
3. Contact resistance: 100 Milliohms MAX
4. Insulation resistance: 1000 Megohms MIN @ 500 VDC
5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN
6. C6 permanent link: Conform to ANSI/TIA/EIA-568B.2-1
ENVIRONMENTAL:
1. Storage: -40°TO +85°
2. Operation: 0°TO 70°
Mates with modular plug conforming to FCC part 68, Subpart F.
MECHANICAL:
1. Housing material: PC UL94V-0
2. Jack housing material: PBT +15%GF UL94V-0
3. PCB material: FR-4 Thickness:1.6mm
4. Contact material: Phosphor bronze stamp PIN T=0.35mm
5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating
6. Wire: AWG 24-26
LK-6KJU011
ELECTRICAL:
1. Voltage rating: 125 VAC RMS
2. Current rating: 1.5 AMP
3. Contact resistance: 100 Milliohms MAX
4. Insulation resistance: 1000 Megohms MIN @ 500 VDC
5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN
ENVIRONMENTAL:
1. Storage: -40°TO +85°
2. Operation: 0°TO 70°
Conform to TIA/EIA 568B Category 5e
Mates with modular plug conforming to FCC part 68, Subpart F.
MECHANICAL:
1. Housing material: PC UL94V-0
2. Inser material: Flame retardancy ABS UL94V-0
3. PCB material: FR-4 Thickness:1.6mm
4. Contact material: Phosphor bronze stamp PIN T=0.35mm
5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating
6. Wire: AWG 24-26
LK-6KJU014
ELECTRICAL:
1. Voltage rating: 125 VAC RMS
2. Current rating: 1.5 AMP
3. Contact resistance: 100 Milliohms MAX
4. Insulation resistance: 1000 Megohms MIN @ 500 VDC
5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN
ENVIRONMENTAL:
1. Storage: -40°TO +85°
2. Operation: 0°TO 70°
Conform to TIA/EIA 568B Category 5e
Mates with modular plug conforming to FCC part 68, Subpart F.
MECHANICAL:
1. Housing material: PC UL94V-0
2. Inser material: Flame retardancy ABS UL94V-0
3. PCB material: FR-4 Thickness:1.6mm
4. Contact material: Phosphor bronze stamp PIN T=0.35mm
5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating
6. Wire: AWG 24-26
LK-6KJU016
UTP Cat6 Keystone Jack 180 degree (Short Type)
Main Description Of The Product:
1. Keystone Jack, CAT 6 class E, UTP Type, 180°punching direction, for connecting application of communication ports in working area.
2. A compact & ingenious designing, with the punching sequence direction marks on the sides of keystone jack. That can provides a correct and quick guide for punching and connectiong operation. And the fastener hats will make sure the cable can be fixed reliably in the IDC clips.
3. According to the standard of ISO/IEC 11801:2002 class & ANSI/TIA/EIA 568-B.2-1 Cat6, T568A punching sequence and T568B punching sequence are both compatible.
4. Connection type: FCC connector for RJ45 patch cord and IDC for 4-pair Cat6 cables.
5. Fitting for the Cat6 general cable distribution system. Compatible for Cat.5 and Cat5e systems.
Technique Characteristics:
1. Material of plastic parts: PC UL94V-0
2. Material of the FCC connectors' 8 pin: Phosphor bronze with golden cladding.
Insertion dependability: 750 times.
3. Material of the IDC clips: Tinned phosphor bronze with golden plated 3U,6U,15U,
30U,50U at option. Fitting for 22AWG/23AWG/24AWG Cables. Punching short type.
4. Dependability: 250 tiems.
5. Standard 110 punching tool.
LK-6KJU017
UTP Cat6 Keystone Jack 180 degree, tooless
Main Description Of The Product:
1. 180°Tooless unshielded KJ. The products are used in the equipment rooms & work area as communication connectors of the intelligent buildings.
2. The structure of the Keystone Jack is compact and tooless. This design is based on contemporaneity aesthetics. The original dust free tooless punching hats can make your work more easy and fast, and it can also prevent the cable to break off from the IDC ports.
3. According to SIO/IEC 11801:2002 Class E & ANSI/TIA/EIA/568-B.2-1 Cat6 standard.
4. According with T568A & T568B labels are adhibited on the both sides of the product to give a exact guide when a engineer punches the cables.
5. Connecting: RJ45 port for STP patch cord and the IDC port for STP horizontal cabling.
6. In accordance with RoHS Derective.
7. Fitting for Cat6 cabling systems, can also be used on Cat.5 and Cat.5e cabling systems.
Technique Characteristics:
1. Housing and other plastic parts material: PC UL94V-0
2. 8 Pin of the RJ45 jack:Phosphor bronze with golden plated 3U,6U,15U,30U,50U at option. Insertion dependability: 750 times.
3. IDC Clips: Tinned phosphor bronze pins. Fitting for 22AWG/23AWG/24AWG Cables. Punching dependability: 250 times.
4. Punching tools: tooless type
5. Testing condition of transmitting capability: 250HMz
LK-6KJU020
UTP Cat6 In-line Coupler RJ45-RJ45
Technique Characteristics:
1. Material of plastic parts: PC UL94V-0
2. Material of the FCC connectors' 8 pin of the RJ45 jack: Phosphor bronze with golden plated 3U,6U,15U,30U,50U at option.
Inserting duration: 750 times.
3. Testing condition of transmitting capability: 250MHz
Company Information:
Lulink Technology, whose full name is Lulink Electronics Technology Co., Ltd, build on the year of 2001, initially as a leading network communication product supplier, engaged in connecting every corner of the world via the network in the most convenient manner and enriching people's life.
Now Lulink became one of Group company focus on the development, production, sales and service of Telecommunication products. The Factory base location on Hangzhou City, The office and Research central on Guang zhou ,Dong guan and Shen zhen, which have hundreds staffs, and the capital asserts reach dozens of million RMB.
Luink's set up based on the market demands and strong requests of loyal customers to Lulink products. Now, our main products containF Five parts: Networking cabling system, Fiber optic system ,Cable assembly,Smart Home system and solor system,thus a product diversification development pattern formed.
Lulink Will do more on the market research, Humanistic product design, professional service improvement, We expect to develop and make progress together with you while us continuously perfect and surpass ourselves. Let us work together to create a better and more brilliant future!
Lulink Service:
1)Reply your enquiry within 24 working hours;
2)Experienced staffs answer all your questions in fluent English;
3)Customized Design is available,OEM&ODM are welcomed;
4)Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs;
5)Special discount and protection of sales area will be provided to our distributor.
FAQ:
Q1: What kind of product do you offer?
A: Our main products include all cables: LAN cables, patch cable, faceplate, keystone, patch panel, cabinet, fiber optical cable, fiber optical adaptor, FO patch panel, ODF, and cable assembly as USB cables, HDMI cables, VGA cables, power cables, AV cables, computer cables and OEM cables.Also launch Smart Home system.
Q2: What's your MOQ? Can you offer free samples?
A: For network cable and fiber optic cable,normally,our MOQ is 3000m per item.
Free samples can be sent to you if available in stock,freight cost need to be paid by your side.
Q3: What's your delivery time?
A: Normally, our lead time is 5~15 working days,subject to the order quantity.
Q4: What's your payment term?
A: We accept T/T,Paypal,Western Union,MoneyGram.Other payments accept through negotiation.
Q5:What's your shipping way?
A: We can support all different kinds of shipping way as following:
By Express,Like Fedex,DHL,UPS,TNT and ect.
By Air,need to know the destination airport.
By Sea,need to know the name of the port of destination.
Other delivery methods are available upon request from clients.
Welcome to contact me:
| Name | Andreas Ai |
| | |
| Tel. | 86-20-87645225 |
| | |
| Website | lulink.en.made-in-china.com |
| | lulink.en.made-in-china.com |
| | http://lulink.en.made-in-china.com |
