Basic Info.
Wiring Devices
Integrated Wiring
Maximum Capacity
96 Cores
Cable Entry and Exit
2entry 2exit
Transport Package
Carton Box
Product Description
Fiber Optic Splice Closure, Fiber Optic Closure, Fiber Optic Joint Box, FOSC, Cables Enclosures
Item No.: LK10A222-1
Type: Waterproof Dome two inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
external dimensions:435mm*160mm (Erect type)
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ15
Sealing Structure: Sticky cincture sealing
Material: ABS/PC
Weight: 2.1kg(Erect type)
Maximum capacity: 96cores
Span-life: 20 years.
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
Environmental temperature: -40ºC to +65ºC
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
Waterproof Dome Fiber Optical Splice Closure, Joint Box
Item No.: LK10A222-2
Type: Waterproof Dome two inlets/outlets
Purpose: aerial, wall-mounting, Pipeline laying way
external dimensions:460mm*160mm (Erect type)
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ25
Material: ABS/PC
Weight: 2.1kg(Erect type)
Maximum capacity: 96cores
Span-life: 20 years.
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
Environmental temperature: -40ºC to +65ºC
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
LK10A313-1 Fiber Optic Splice Closure, Fiber Optic Closure
Item No.: LK10A313-1
Type: Horizontal type three inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 46.7*18*13CM
Cables Entry & Exit:3Entry 3Exit
Cable Diameter (mm): Φ7-Φ16
Sealing Structure : Sticky cincture or silicon gum material Sealing
Material: ABS / PC
Maximum capacity: 96cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
Environmental temperature: -40ºC to +85ºC
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance:The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It isused for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
Main Technical Indexes:
1.Airproof performance: Airing pressure inside
box100Kpa
, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
2. Re-encapsulation performance: no change in the index of air-proof performance after three times of repeat encapsulation
LK10A414-1 Fiber Optic Splice Closure, Fiber Optic Closure
Item No.: LK10A414-1
Type: Horizontal type four inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 46.7*18*12CM
Cables Entry & Exit:four inlets/outlets
Cable Diameter (mm): Φ7-Φ16
Sealing Structure : Silicon gum material Sealing
Material: ABS/PC
Maximum capacity: 96cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Environmental temperature: -40ºC to +75ºC
Atmospheric pressure: 70∽106KPa
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
LK10P124-1 Waterproof Dome Fiber Optical Splice Closure, Joint Box
Item No.: LK10P124
Type: Waterproof Dome one inlets/four outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Weight: 3kg(Erect type)
Material: ABS / PC
Dimension (mm): 51*22CM (H*D)
Cables Entry & Exit:1Entry 4Exit
Cable Diameter (mm): Φ7-Φ31
Sealing Structure: Heat shrinkable Sealing
Max Capacity of Core:144 cores
Environmental temperature: -40ºC to +85ºC
Atmospheric pressure: 70∽106KPa
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Application
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
LK10P126-1 Waterproof Dome Fiber Optical Splice Closure, Joint Box
Item No.: LK10P126-1
Type: Waterproof Dome one inlets/ six outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Weight: 4kg(Erect type)
Material: ABS / PC
Dimension (mm): 55*25CM (H*D)
Cables Entry & Exit:1Entry 6Exit
Cable Diameter (mm): Φ7-Φ31
Sealing Structure: Heat shrinkable Sealing
Max Capacity of Core:288cores
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC numeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40ºC to +85ºC
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
LK10P212-1 Horizontal type Fiber Optic Splice Closure with two inlets/outlets
Item No.: LK10P212-1
Type: Horizontal type two inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 58*19*14CM
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ30
Sealing Structure: Sticky cincture sealing
Material: PC/APS
Maximum capacity: 144cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Usage:
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Suitable for aerial, pipelined or direct buried applications; suitable for common fiber cables and ribbon cables; suitable for straight-through as well as for branch joints to seal and protect splice, fusion, layout and storage of the fiber cables
Technical indexes
(1) Environment Condition:
Environment Temperature: -40ºC~+75ºC
Atmospheric pressure: 70~106Kpa
(2) Electric property:
Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;
The Voltage resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.
(3) Optic property:
The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.
(4) Seal Performance:
Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
(5) Re-encapsulation Performance:
No change in the index of air-proof performance after three times of repeat encapsulation
(6) Mechanical Performance:
After all the following tests, the box and all the components inside don't change, check through gently or open it if necessary.
When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test
a. can withstand 1000N horizontal pull force;
b. can withstand 3000N/10cm vertical pressure;
c. can withstand 16N·m impact three times;
d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;
Notes:
1. It is better to fasten the bolts again thoroughly every 10 minutes after screwing down them.
2. Screwing down the bolts of the box should strictly act according to "installation instruction".
3. Please check whether the pothook connector has been installed or not before screwing down the box for aerial application.
LK10P212-2 Fiber Optic Splice Closure, Fiber Optic Closure
Item No.: LK10P212-2
Type: Horizontal type two inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 47 *17 *8.5CM
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ20
Sealing Structure: Sticky cincture sealing
Material: PC/APS
Maximum capacity: 48cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Usage:
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Suitable for aerial, pipelined or direct buried applications; suitable for common fiber cables and ribbon cables; suitable for straight-through as well as for branch joints to seal and protect splice, fusion, layout and storage of the fiber cables
Technical indexes
(1) Environment Condition:
Environment Temperature: -40ºC~+75ºC
Atmospheric pressure: 70~106Kpa
(2) Electric property:
Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;
The Voltage resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.
(3) Optic property:
The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.
(4) Seal Performance:
Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
(5) Re-encapsulation Performance:
No change in the index of air-proof performance after three times of repeat encapsulation
(6) Mechanical Performance:
After all the following tests, the box and all the components inside don't change, check through gently or open it if necessary.
When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test
a. can withstand 1000N horizontal pull force;
b. can withstand 3000N/10cm vertical pressure;
c. can withstand 16N·m impact three times;
d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;
Notes:
1. It is better to fasten the bolts again thoroughly every 10 minutes after screwing down them.
2. Screwing down the bolts of the box should strictly act according to "installation instruction".
3. Please check whether the pothook connector has been installed or not before screwing down the box for aerial application.
LK10P212-3 Horizontal type Fiber Optic Splice Closure with two inlets/outlets
Item No.: LK10P212-3
Type: Horizontal type two inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 48.5*18*12CM
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ15
Sealing Structure: Sticky cincture or silicon gum material Sealing
Material: PC/APS
Maximum capacity: 96cores
Innovative design is horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC with the simplest installation in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
Main Technical Indexes:
1. Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
2. Re-encapsulation performance: no change in the index of air-proof performance after three times of repeat encapsulation.
LK10P212-4 Horizontal type Fiber Optic Splice Closure with two inlets/outlets
Item No.: LK10P212-4
Type: Horizontal type two inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 58 *19*15CM
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ25
Sealing Structure: silicon gum material Sealing
Material: PC/APS
Maximum capacity: 144cores
Span-life: 30 years.
Innovative design is horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC with the simplest installation in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, and retaining ring.
LK10P212-4 Horizontal type Fiber Optic Splice Closure with two inlets/outlets
Item No.: LK10P212-4
Type: Horizontal type two inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 58 *19*15CM
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ25
Sealing Structure : silicon gum material Sealing
Material: PC/APS
Maximum capacity: 144cores
Span-life: 30 years.
Innovative design is horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC with the simplest installation in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
LK10P313-1 Horizontal type Fiber Optic Splice Closure with three inlets/outlets
Item No.: LK10P313-1
Type: Horizontal type
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 58*25.5*14CM
Cables Entry & Exit:3Entry 3Exit
Cable Diameter (mm): Φ7-Φ30
Sealing Structure: Sticky cincture sealing
Material: APS/PC
Maximum capacity: 144cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Usage
Suitable for aerial, pipelined or direct buried applications; suitable for common fiber cables and ribbon cables; suitable for straight-through as well as for branch joints to seal and protect splice, fusion, layout and storage of the fiber cables
Technical indexes
(1) Environment Condition:
Environment Temperature: -40ºC~+75ºC
Atmospheric pressure: 70~106Kpa
(2) Electric property:
Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;
The Voltage resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.
(3) Optic property:
The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.
(4) Seal Performance:
Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
(5) Re-encapsulation Performance:
No change in the index of air-proof performance after three times of repeat encapsulation
(6) Mechanical Performance:
After all the following tests, the box and all the components inside don't change, check through gently or open it if necessary.
When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test
a. can withstand 1000N horizontal pull force;
b. can withstand 3000N/10cm vertical pressure;
c. can withstand 16N·m impact three times;
d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;
Notes:
1,It is better to fasten the bolts again thoroughly every 10 minutes after screwing down them.
2,Screwing down the bolts of the box should strictly act according to "installation instruction"
3,please check whether the pothook connector has been installed or not before screwing down the box for aerial application
LK10P313-2 Fiber Optic Splice Closure, Fiber Optic Closure
Item No.: LK10P313-2
Type: Horizontal type
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 44.5*22*16CM
Cables Entry & Exit:3Entry 3Exit
Cable Diameter (mm): Φ7-Φ16
Sealing Structure : Silicon gum material Sealing
Material: APS/PC
Maximum capacity: 144cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
LK10P313-1 Horizontal type Fiber Optic Splice Closure with three inlets/outlets
Item No.: LK10P313-1
Type: Horizontal type
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 58*25.5*14CM
Cables Entry & Exit:3Entry 3Exit
Cable Diameter (mm): Φ7-Φ30
Sealing Structure : Sticky cincture Sealing
Material: APS/PC
Maximum capacity: 144cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Usage
Suitable for aerial, pipelined or direct buried applications; suitable for common fiber cables and ribbon cables; suitable for straight-through as well as for branch joints to seal and protect splice, fusion, layout and storage of the fiber cables
Technical indexes
(1) Environment Condition:
Environment Temperature: -40ºC~+75ºC
Atmospheric pressure: 70~106Kpa
(2) Electric property:
Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;
The Voltage resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.
(3) Optic property:
The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.
(4) Seal Performance:
Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
(5) Re-encapsulation Performance:
No change in the index of air-proof performance after three times of repeat encapsulation
(6) Mechanical Performance:
After all the following tests, the box and all the components inside don't change, check through gently or open it if necessary.
When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test
a. can withstand 1000N horizontal pull force;
b. can withstand 3000N/10cm vertical pressure;
c. can withstand 16N·m impact three times;
d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;
Notes:
1,It is better to fasten the bolts again thoroughly every 10 minutes after screwing down them.
2,Screwing down the bolts of the box should strictly act according to "installation instruction"
3,please check whether the pothook connector has been installed or not before screwing down the box for aerial application
LK10P313-1 Horizontal type Fiber Optic Splice Closure with three inlets/outlets
Item No.: LK10P313-1
Type: Horizontal type
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 58*25.5*14CM
Cables Entry & Exit:3Entry 3Exit
Cable Diameter (mm): Φ7-Φ30
Sealing Structure : Sticky cincture Sealing
Material: APS/PC
Maximum capacity: 144cores
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40ºC to +75ºC
Usage
Suitable for aerial, pipelined or direct buried applications; suitable for common fiber cables and ribbon cables; suitable for straight-through as well as for branch joints to seal and protect splice, fusion, layout and storage of the fiber cables
Technical indexes
(1) Environment Condition:
Environment Temperature: -40ºC~+75ºC
Atmospheric pressure: 70~106Kpa
(2) Electric property:
Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;
The Voltage resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.
(3) Optic property:
The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.
(4) Seal Performance:
Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
(5) Re-encapsulation Performance:
No change in the index of air-proof performance after three times of repeat encapsulation
(6) Mechanical Performance:
After all the following tests, the box and all the components inside don't change, check through gently or open it if necessary.
When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test
a. can withstand 1000N horizontal pull force;
b. can withstand 3000N/10cm vertical pressure;
c. can withstand 16N·m impact three times;
d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;
Notes:
1,It is better to fasten the bolts again thoroughly every 10 minutes after screwing down them.
2,Screwing down the bolts of the box should strictly act according to "installation instruction"
3,please check whether the pothook connector has been installed or not before screwing down the box for aerial application
LK10P323-1 Waterproof Dome Fiber Optical Splice Closure, Joint Box
Item No.: LK10A323-1
Type: Waterproof Dome three inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 51*22CM (H*D)
Cables Entry & Exit: 3Entry 3Exit
Cable Diameter (mm): Φ7-Φ25
Sealing Structure: Heat shrinkable Sealing
Material: ABS/PC
Maximum capacity: 144cores
Weight:: 3kg(Erect type)
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40ºC to +85ºC
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
LK10P323-1 Waterproof Dome Fiber Optical Splice Closure, Joint Box
Item No.: LK10A323-1
Type: Waterproof Dome three inlets/outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Dimension (CM): 51*22CM (H*D)
Cables Entry & Exit: 3Entry 3Exit
Cable Diameter (mm): Φ7-Φ25
Sealing Structure: Heat shrinkable Sealing
Material: ABS/PC
Maximum capacity: 144cores
Weight:: 3kg(Erect type)
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40ºC to +85ºC
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won't attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables
Suitable for single core fiber optic cable and ribbon fiber optic cable
){kind=link}