8 Ports Unmanaged Gigabit Ethernet Switch with Eight SFP Ports

 
LK14Switch001
 
8 ports Unmanaged Gigabit Ethernet Switch with eight SFP ports
 
LK14SWITCH001 8 ports Gigabit Ethernet Switch has eight 1000M SFP sockets. Customer can choose different 1000M SFP module according as his demand, such as Multimode or Single mode, Single fiber or Dual fiber and Single mode 20-100km etc. The product is possessed of stable performance, excellent quality and reasonable price with adopting latest IC from USA. It is applicable to use in constructing of Optical Fiber Ethernet network.
 
Main features
Provides 8 SFP sockets
The SFP slot supports 1000M at full duplex.
Supports 802.3x flow control on full-duplex and Back-pressure flow control on half-duplex.
Supports VLAN and QoS.
Supports Trunking function.
Supports the max 1632 bytes frame.
Low power consumption (10W), low heat, and good reliability.
 
Technical Specifications
Standard compliance:IEEE802.3/u/z/ab, 1000Base-SX/LX.
MAC address table: 8K
Frame buffer memory:1MKb
With 20 Gbps switch fabric
Connector: SFP :1000Mbps;
Cable:Multimode Fiber:50/125,62.5/125μm(the max distance up to 224/550m)
Single mode Fiber:8/125,8.7/125,9/125μm(the max distance up to 10~100 km)
Flow control:Full Duplex: IEEE802.3x flow control;
Half duplex: back pressure flow control
LED:PWR,SFP1 Link/Act, SFP2 Link/Act, SFP3 Link/Act, SFP4 Link/Act, SFP5 Link/Act, SFP6 Link/Act, SFP7 Link/Act, SFP8 Link/Act;
Power Requirement:  AC220V(100-240V),50~60Hz; DC:5V,3A
Ambient Temperature::0 ~ +50ºC;
Storage Temperature::-20 ~ +70ºC;
Humidity:5% ~ 90%;
Dimensions:30(high)×187(width)×110(length)mm;
 
Order Information 
 
LK14Switch001
 
1.Overview
The Gigabit Ethernet Multiplexer aggregates 2 ports Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology functioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system's transmits-scion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports. The multiplexer must be used in couples.
       
2. Checklist
Before you installing the Multiplexer, verify that the package contains the following:
1. The Gigabit Ethernet Multiplexer.
2. AC/DC Power Adapter.
3. This User's Manual.
Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.
 
3. LED Description
There are five LED at Front of Multiplexer:
  
4. Installing Gigabit Ethernet Multiplexer
The multiplexer must be used in couples.
1. Attach one 2.5G SFP module to SFP1 Cage on the Multiplexer. Attach two 1.25G SFP modules to SFP2 and SFP3 Cage on the Multiplexer.
2. Link fiber from the SFP1 on one Multiplexer with SFP1 on another Multiplexer. It can link through CWDM system.
3. Link fiber from the SFP2 and SFP3 on the Multiplexer to Gigabit Ethernet Service.
  Note: SFP2 on one Multiplexer link pass only with SFP2 on another Multiplexer. SFP3 on one Multiplexer link pass only with SFP3 on another Multiplexer.
4. Connect the power cord to the Multiplexer and check that the Power LED lights up. The Px LEDs will light when all the cable connections satisfactory.
 
5. Technical Specifications
 The Multiplexer conforms to the following standards:
l Standards: IEEE 802.3AB 1000Base-T
1000Base-SX/LX/LH
l Fiber Cable:
Multi-mode: 50/125,62.5/125µm
Single-mode: 9/125µm.
l Data Transfer Rate:
2.5Gbps for SFP1, 1Gbps for SFP2 and SFP3.
l LED Indicators:
Power, P1 2.5G, P1 Link/Act, P2 Link/Act,
P3 Link/Act,  
l Power Requirement: 220V(110-245V)AC,50Hz
l Ambient Temperature: 0 ~ 50ºC
l Humidity: 5% ~ 90%
l Dimensions: 26×70×93mm(H×W×D)